Toolbox Glue Add-on for Creality K1

This is a dead simple printed add-on for the Tool Box for Creality K1 (New V3) by ATAMAN found at https://www.crealitycloud.com/model-detail/652d73835b02def31661d2d3

This is simply to add a box onto the front of this model (v1 tested) that can be clipped onto it to hold the glue and grease sent with the K1. A simple print that took 34.5g of filament and 44m on the K1 with the default settings.
Supports are needed for 1 overhang although in my case I forgot them, and it didn’t come up too badly at all.
All credit to the base toolbox designer and I strongly recommend checking them out.