The feet on my Delta Cycle Michelangelo bike rack keep sliding around on my floor. This holds them in place.
BOM
- 2in double-sided sticky tape. I used VHB, but perhaps something thinner would work better
Printing
- 2 feet, so print 2 copies
- Any filament is fine
- Pretty much any settings is fine. I used 1.2mm walls, .8mm top-bottom, and 20% cubic infill.
Usage
- Apply double-sided tape to the bottom of the feet.
- Put them on the floor where the rack's feet are
License:
Creative Commons — Public Domain
pastrami4033
