AB/Y Guitar or Instrument Pedal Enclosure

Build your own stomp box!

Designed to house a simple AB/Y circuitry that either lets you send the signal from one instrument to one of two, or both destinations at once, or take the signal from one of two instruments, or both simultaneously and send to a single destination.

Made with the following components if getting the right sized parts is your thing:

• Footswitch
  • https://www.amazon.ca/gp/product/B08TBT9S5J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
• A OR B → A AND B toggle switch
  • https://www.amazon.ca/gp/product/B07VK7GWVQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• Input/output jacks (most if not all mono or stereo ¼" / 6.5mm jacks should work)
  • https://www.amazon.ca/gp/product/B01CXXQBJU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  • https://www.amazon.ca/gp/product/B08FDR6HXK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• 9V jacks
  • https://www.amazon.ca/gp/product/B08SLNQ5TN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• LEDs (any 5mm LED will do)
  • https://www.amazon.ca/gp/product/B07N2GVCYZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• LED holder thingies
  • https://www.amazon.ca/gp/product/B01M4RUY4M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• Any 390Ω or higher resistors (as per LED specs on 9V supplies). I used 890Ω and the LEDs are still way too bright so you might want higher

I can figure out how to draw wiring diagrams if enough people are interested

Next one to come: True bypass switchable effects loops. Something like this but a modular design where you can add as many loops as you'd like