November 7, 2023
Description
Since I have my Prusa XL in a trotten and want to use an enclosure made of a "hat" and a "front I designed standoffs for the IKEA Trotten. I printed them in PLA, but other Materials should work too. You will one additional M4 or M5 Screw that is at least 20mm long, a washer and a nut. Also the 4 initial Screws from the Trotten are used.
I suggest to print with at least 4 Perimeteres with a 0.6 nozzle or 6 Perimeters with a 0.4 Nozzle.
The Model is not made to put heavy stuff on top. I will just store my enclosure on top and it should easily hold up to 20 Kilogramm.
License:
Creative Commons — Attribution
Acht
