November 11, 2023
Description
I decided to make a “quick” model of a Dig Quad v3 board and got carried away. Anyway you could import this STL into modeling programs if you are wanting to design your own enclosure/standoffs etc. I got the most critical dimensions (mount hole spacing and PCB dimensions) from the QuinLED site, the rest i did with calipers. all of the components are definitely accurate enough to make a tight fitting enclosure, i went down to 1/10th mm in my measurements.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
espn8-theocho
