Simple hanger no supports

Just a simple, neat and durable hanger which can be sticked to the wall with double-sided tape or screwed down if preffered.

I was looking for simple, easy to print towel hanger and because nothing convinced me, I decided to make my own.

I printed it with PETG, but PLA will work as well. I recommend turning ironing ON to get that pure top surface. If you care about Z-seam, it is good to set its position on left or right edge of the hook, so it will become less visible.

I used these settings for PETG:
0,4mm nozzle
Layer height: 0,2mm
Wall line count: 5
Top&bottom layers: 3
Infill - cubic: 30%
Print speed: 80mm/s - infill; 40mm/s - walls/top/bottom; 
Ironing: ON

With these, print time is around 40mins

Feel free to adjust for your own needs