Climbing express cliping remote stick

New version available, see website:

https://crostik.cr3design.ch

------------------------------------------------------------------------------------------------

Build your own remote clipping stick !

Compatible will multiple express brand, see pictures

Stick is based on a pool telescopic stick from Planet Pool for the 3 firsts tubes :

https://www.jumbo.ch/fr/manche-telescopique-aluminium-5491?sku=1096044

And a 20mm diameter PVC tube for the 4th tube

Compatible the the Beta BrushStick, use the dedicated adaptor

Assembly procedure:

1/ Reduce the length Cut the planet pool tube (mine is cut a 90cm)

Warning, for the smallness tube, cut on the side with the “cap”. It have to be removed

2/ cut the PVC tube at the chosen length pool stick +2cm

3/ Print and assemble the bar connector 25 to 20mm 

4/ Print and assemble the express support with the adaptor. You will need a M4x12 screw and bold for strong assembly.

5/ Put the clip at the correct height compatible with your express

6/ Assemble the express support on the stick

7/ Enjoy your climb !

Demo here:

Print parameters:

PETG / 0.2mm / no support

Découvrez mes autres créations:
https://www.facebook.com/CR3Design

Find my others creations here:
https://www.facebook.com/CR3Design