Dragon Burner Beacon Probe Mount - Micron MGN9H Linear Bearing

TruWrecks has updated this model so that you no longer have to cut the belts while having better clamping power! You can find his model here: https://www.printables.com/model/941344-dragon-burner-beacon-probe-mount-v2

Thanks for helping improve the models TruWrecks!

--------------------------------------------------------------------------------------------------------------

Note: due to the mounting screw positions going from the mount to the X linear rail carriage, you may need to cut either some notches, or thin the belts to allow the screws to pass through. I'm uncertain as to how much this may affect the clamping force onto the belts, but I'll give it a go, and keep this post updated. 

Also, check to make sure you have clearance between the probe and print bed when the nozzle is close to the print bed! The probe should be above the nozzle by about 2mm. Verify before printing!

DO THIS AT YOUR OWN RISK! maybe have some spare belts on hand just in case.

--------------------------------------------------------------------------------------------------------------

This is a remix of a remix I did on a model kindly provided by Gulsifer. This allows the mounting of a Beacon Probe using a Dragon Burner tool head on a MGN9H linear bearings used with Voron 0 and Micron builds. Probably a little overkill, but damn are these probes awesome!