Bambu Lab P1 and X1 Series Poop Chute and Waste Bucket System

This is combo poop chute and waste bucket that can be linked together to form a complete waste system.

The chute and the box separatey fit on the print bed of a P1 or X1 series printer - so use this to check if it woulf fit on your printer (the print bed is 257mm^3)

There are holes for small magnets on the inside of the chute model to be able to keep it attached to the printer.

Currently there is no method of attaching the waste box and chute together, but this will come in future revisions, or you can remix it and add that on.

I haven't printed it yet but when I do I'll update this with some photos. 

The transparent screen should be printed with either transparent PC or PETG or a 1.5 to 2mm sheet of arcylic could be used. 

Thanks!