Vibration reduction for PTZ camera

Introduction

The church is a wooden structure and known to be flexible and safe in case of earthquakes.   However, it cannot provide the best mount point for our 20x zoom live stream camera. 

The vibration issue is worsened as one of the rooms near the camera was assigned to baby/child siting.

This is my attempt to resolve the issue. 

Facts:

1. The Camera weight 1.3 KG, so DIY method such as using ear-plug as damper would not work. 
2. To prevent any accident, metal screw is required for mounting and fail-safe mechanism should be included to prevent falling of camera.
3. There exists solution in the market, but they are over-designed for our situation. (and cost around 70 CAD)

The Product:

The final product includes 2 3D printed parts (top and base), zip ties, 4 springs for vibration isolation and mounting tools (Screw and Nuts)

The base includes mount point for a ¼-20 SS Jam Nut and spring.

Top cover comes with a mounting slot for the camera, which use ¼-20 tread to secure the camera. 

Zip-tie were used as a fail-safe to prevent accidental fall down of camera.

Price Estimation:

This is designed by Onshape.

https://cad.onshape.com/documents/65207421fc121bfbed04261b/w/398d47140252ddc16c6c8895/e/2c773d71a4b1fce955f6c24e