November 12, 2023
Description
The gummy bear models are a remix of ‘Low Poly Gummy Bear’. The case that will house the gummy bears are my design. The “GUMMY BEAR” title on the box cover is placed to be printed with Octagram Spiral fill pattern. Looks great but not so much with white filament.
Recommendations for the housing box:
0.4mm nozzle
0.2mm layer height
Bottom fill pattern: Octagram Spiral
Fill angle(Layers and perimeters → advanced): 180 degrees
*Also recommend “Hilbert Curve” for inside the box.
You can just use the original model, Low Poly Gummy Bear, and downsize it to 25%. (32.44mm height)
License:
Creative Commons — Attribution — Noncommercial
Park Jin
