speedmarker french cleat mount

This is a simple french cleat mount for a speedmarker. The tool needs a magnet on his back so it can attach to the magnet of the mounting piece. 

Additionally you need a 6x2mm magnet. After Printing you have to press the magnet in the hole. Please place the holder on a flat surface so you don't push the magnet through the hole.

I tested it with the let's bastl speedmarker, but it should work with the black ones on amazon too. Just watch if there is a magnet mount on the tool.

See also my other workshop stuff: https://www.printables.com/@Antimaterie/collections/1000059

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.