November 13, 2023
Description
A simple and compact build plate mount for your Saturn 3 Ultra and Mars 4 Ultra to let excess resin drip off on an angle into your vat.
If you have a heated chamber you should print it with a more heat resistant material. The recomended material for 3D printing: PLA+, PETG, ABS
I'm using a Neptune 4 pro to print this bracket, following these setting for more toughness of the bracket.
Layer height 0.2mm-0.25mm
Wall thickness 1.6mm
Wall line count 4
Top/Bottom Thickness 1.6mm
Infill density 15%
Infill pattern Grid
Support needed
License:
Creative Commons — Public Domain
7
Mr.HuyNguyen
