November 13, 2023
Description
The settings in the 3mf file use 1.2 mm extrusion width on a 0.4mm nozzle, which works great on my printer, but YMMV.
The 3mf is set up for PETG, but includes 100% fan and slower minimum speed, because my first attempt with less fan and faster minimum speed tried to become a puddle as it got near the neck of the funnel.
The idea with using vase mode was to eliminate any PETG strings in the funnel neck, even using somewhat-iffy PETG.
In theory I think one could keep the handle and set enough bottom layers to print that before going into vase mode for the rest, but I only just thought of that, so just an idea for a different remix.
The modified onshape is here:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
4D_Printer
