Twisted Planter with Legs, Vase Mode

A Twisted Planter with Legs, 3D printable in 2 parts. The planter is designed to be printed in vase mode and the legs without supports (to save you some time :)). 

For indoor and outdoor use. 

I would suggest to connect the parts with some glue or double sided tape. 

Scale as you like, please don't forget to scale both parts if you do ;).

Print settings

Part 1: Planter - vase mode
Nozzle size: 0.4, 0.6, 0.8 
Layer Height 0.2mm
Layer Width/ thickness: 0.6, preferably 0.8 or 1mm (using a larger nozzle)
Print speed: 45mm/sec
Vase Mode enabled (aka Spiral vase in PrusaSlicer and Spiralize Outer Contours in Cura)

Print time: 2.5 hours
Material: PETG

Part 2: Planter Legs base - normal mode
Nozzle size: 0.4, 0.6, 0.8
Layer height 0.2mm
Layer width/ thickness: 0.4
3 Perimeters
10 - 15% Infill
Print speed: 45mm/sec
No supports needed (print with legs up)

Print time: 2.5 hours

Total print time at 100% scale (~9 x 11 cm): 5 hours 

Happy printing.