Nayzilam Cabinet Holder

In the case of a Tonic-clonic seizure, having Nayzilam is a must. If stored in cabinet the medical can become hard to find and every second counts during a big seizure. This is a simpled 3D printed holder than can be mounted under a cabinet or on the door. I used command strips, but glue or doubled sided foam tape would work the same.

Print settings:
Shell: 3
Infill: 100
Top & Bottom Layers : 4 Each

Notes, there are two models, One with and Brim and one Without. I found with the high to with ration,100mm to 5mm on the narrow, the part was common to fall with the brim setting even at 5mm wide. The model's brim is 2 layers (0.4mm) high providing a much better tie down. Please feel free to modify or suggest modifications for other medicines. I'm hear to help