December 13, 2023
Description
Since I don't want to feed the Qidi X-Max 3 with filament from the back or the left side, but want to use the run out sensor, I have created a small L-shaped bracket to bring the sensor to the side of the printer so that I can load it from the front.
Printed in PLA, 0.2 no support.
One can use the original screws to mount the bracket. 4 Additional M3x16 screw are needed for mounting the sensor.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Maker Baer
