Plant/Garden Labels with Build-in Spikes

Labels for indicating rosemary, parsley, green onions and sage plants. They are designed in FreeCAD 0.19.1, sliced with PrusaSlicer 2.3 and printed on a PRUSA MK3S+ using PLA filament.

All 4 3MF files are pre-sliced with a stop to change filament for the colored letters.

In addition to the previous pause, the sage and green onion labels will pause printing to add a spike, as the spike is encapsulated in the label, and cannot be removed after the printing is completed; see image.

• 6 Inch Garden Stakes
• SUNLU Filament PLA Plus 1.75mm - RED
• SUNLU Filament PLA Plus 1.75mm - BLACK

UPDATE

Where I leave outdoor temperatures can reach +90° F (+32° C) and my PLA signs got distorted by the heat!. I re-made many of the signs using PETG filaments instead of PLA.

I used the following PETG filaments:

• SUNLU Filament PETG 1.75 BLACK
• SUNLU Filament PETG 1.75 RED
• SUNLU Filament PETG 1.75 BLUE 
• Polymaker PolyLite PETG 1.75mm Lime Green
• Polymaker PolyLite PETG 1.75mm Turquoise
• Polymaker PolyLite PETG 1.75mm Orange

Enjoy!