DustyBoi: Under Table Vacuum adapter for Delta 52-963 Bandsaw

Here's a video in action: https://www.reddit.com/r/functionalprint/comments/myy667/i_used_to_have_a_dusty_bandsaw_now_i_have_dustyboi/

This attachment removes the dust from the bandsaw blade. The vac attachment is sized for a Festool D36 hose. I've included the F3D file so you could modify it for a different diameter (in the parameters).

I don't know if this will fit other delta bandsaws, and I honestly don't even fit another 52-963 (i.e. I'm not sure how standard the holes are).

To attach this to the saw I used:

- 1/4-20 threaded screw at 5/8" length
- 10-32 threaded screw at 1/2" length

## Printing

Print DustyBoi in the orientation in the STL with supports. 0.2 layer height for best results 0.3 will get the job done quick. I used supports on the baseplate with these settings https://www.reddit.com/r/prusa3d/comments/m0fcvk/prusa_newbie_here_is_there_any_way_to_adjust_the/.

Flip the lid upside down and it doesn't need supports.