November 17, 2023
Description
This is a simple design I create for myself and wanted to share.
Guards (Golf ball shaped) for the bars of your motorcycle to protect from scratches.
===================================================
Size:
Sphere diameter = 60mm
Inner hole diameter = 22mm (can make more if you like)
===================================================
Recommended settings:
Infill: 25%+
Filament : PETG or Stronger
**TPU Should work fine too**
===================================================
Extra part you will need:
2 x (M4x30) Screws and their Nuts ( 7mm height & 3.2 width aprox.)
===================================================
Instructions :
Slide the nuts into the side holes of Part 2 and align them with the screw
Screw and you're ready :P
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Black Portal
