Techno error flower pot - thicker option

Hi, if you open the .m3f file in Prusa Slicer, you will get the original design and two cylinders. Current setting is that internal diameter is 114mm.

The negative-volume cylinder defines internal dimensions. If you scale it, ensure it does not sit on the bed - z position defines thiskness of the bottom. (Currently 2 mm).

The second cylinder (positive volume - wall thickness ensurer) is slightly larger in x and y dimensions. Difference in dimensions defines minimal wall thickness. For instance is x and y sizes are 0.9mm more than negative-volume cylinder, then one perimeter with 0.4mm nozzle is ensured, this is bare minimal. 

• diff of 1.8mm w/ 0.4mm nozzle => 2 perimeters
• diff of 2.7mm w/ 0.4mm nozzle => 3 perimeters
• diff of 1.3mm w/ 0.6mm nozzle => 1 perimeter
• diff of 2.6mm w/ 0.6mm nozzle => 2 perimeter

Take this table as general guide and use your experience with your printer - you may need to adjust it differently. Best is to review slicer results.

Enjoy!