June 27, 2025
Description
2025 06 25 : News : i've added a full 3 links set : the C-hub and the panhard bar support, see pictures.
Beware : to have no bump steer the panhard and servo link need to be the same length and to be parallel.
Use the v3 and the servo support
It's a 14° caster C-HUB for scx10 clone.
On mine the caster is set at 0° which turns negative caster when the crawler is level :(
I made this 14° C-HUB to compensate for ~12° of axle and give a final ~2° of positive caster.
Possible to make any caster angle you want, just ask.
It's the right side, don't forget to mirror the HUB if you want left side too
I suggest printing them with the two tips pointing downward and using support.
12/06/20 : added improved version : 2° less camber b(8), 2° more caster (16) and harder/better/stronger arm.
05/09/20 : added the panhard version of scx-8-16-C-Hub-3Links.STL
08/11/2020 : more sturdier version after breaking one
05/01/2020 : modified panhard version of scx-8-16-C-Hub-3Links.STL to make it usable for both side.
22/10/2022 : added version with 5° of camber instead of 8
01/07/2024 : added version with 20° caster
Category: R/C Vehicles
License:
Creative Commons — Attribution
8
Crazytiti
