Key Cap Fridge Magnets

Cherry MX Key Cap design that can be printed to use as Fridge Magnets. 

It would be amazing to have names and random stuff attached to the fridge door as magnets. 

Variations: 

• Alphabets/Numbers protruded out: This can be used as multicolor by changing filament at layer 47 when printing at 0.2 layer height with 0.4 mm nozzle 
• Alphabets and Numbers etched into the keycap: This can be printed as single print and can highlight the groove with a marker or leave the design as is. 

Printing Instructions: 

• Layer Height: 0.2mm (Important for version A for multicolor prints)
• Material: PLA 
• Infill: Min 5%
• Supports: No 
• Rafts: No 
• Brim: No 
• Skirt: No 

Hardware: 

• Magnets: 6x3mm 

Notes: 

• Feel free to comment below if you want other keycaps added.