Miami Dolphins Desk/table stand

Made a Miami Dolphins logo stand with base for name plate.

I created this on my Ender 3 Max Neo with GCode Pauses for filament swap.

This is the Filament swap I choose.  I used all IIID MAX PLA+

Model comes in 3 parts.  Upper Sun, Lower Sun with Base for name and the Dolphin.  The three parts will need to be glued together.

I used Orange IIID Max PLA+ for the top and bottom Sun pieces.

For the name in the Dolphins font I went to:

Dolphins Font Download (fontmeme.com)

You can create the name into a PNG.  From there I used Inkscape (although anything like this can be used) separated the colors and saved each one as an .SVG file.  Put each into Tinker Cad and created a multilevel model of the name for the base plate area.  I used white at 2mm and then swapped to Teal for 1mm which seemed to work out well.

The Dolphin, I swapped between White, Light Blue and Teal

Dolphin

Start with White

Line Level #51  Swap to Light Blue

Line Level #57 Finish with Teal