Radiomaster Pocket Gimbal Spacer Lowered Gimbals

🌟 Unleash Comfort: Radiomaster Pocket Gimbal Spacer Installation! 🌟

Ahoy, fellow aviators! Since embracing the Radiomaster Pocket, I've been soaring through the skies with joy. However, a tiny hiccup emerged – the thumb position felt a tad too high, leading to strains and less-than-pleasant maneuvers. My roots trace back to the Jumper T-Lite v2 with the AG-01 Mini mod, where the gimbals nestled lower, cradling my thumbs in comfort. Fear not, for we're about to bridge the gap between comfort and control!

🚀 Why Gimbal Spacers? 🚀

Before we embark on this transformative journey, let's celebrate what makes the Radiomaster Pocket a miniature marvel. The tiny form factor, the seductive rounded edges, and those gimbal storeaways – perfect for quick whooping sessions. And those gimbals! They glide without a care, free from the shackles of typical spring resistance in the middle. Cudos to Radiomaster for coming up whit such masterpieces at this pricepoint!

🔧 Installation Guide - Comfort Unleashed! 🔧

Step 1: Unveil the Heart
Gently crack open your Radiomaster Pocket by lifting up the battery covers and remove the two screws hidden under each cover.

Step 2: Farewell to Stock Gimbals
Unscrew those gimbals.

Step 3: Align for Comfort
Grab those gimbal spacers and align the top of the print with the top of the gimbal (The notched side corresponds to the side on the gimbal).

Step 4: Fasten the Magic
Bring out the big guns – 2x M2x8 and 2x M2x10 screws per gimbal. The longer screws go on the side whitout the notch. Now secure those spacers in place, locking in a new era of comfort and control.

✨ Revel in Thumb Bliss! ✨

With the gimbal spacers snugly in place, your Radiomaster Pocket is now customized for an effortlessly relaxed thumb experience. Say goodbye to strain and hello to precision like never before!

🔧 Parts Needed for the Transformation: 🔧

2x M2x8 Screws (Per Gimbal)
2x M2x10 Screws (Per Gimbal)