GEN2 Hex Bit (2 inch) Drawer Insert - Tilt Release

The GEN2 Hex Bit (2 Inch) Drawer Inserts are designed to fit the GEN2 Grid Drawers to holds them securely in place, but these are also designed to fit in any standard GEN2 lack drawer as well. They can be mixed and matched with other inserts to customize your storage to your needs.

Fits ¼" hex bits up to 2" (50mm long)

Easy to remove design! After a few designs this one was my absolute favorite. To remove simply press on the base of the bit, this teeters the front of the bit upward making it easy to grab a hold of. 

RECOMMENDED PRINT SETTINGS

Filament: PLA (PETG or ABS for heavier duty storage)
Nozzle Size: 0.4mm or 0.6mm
Print Height: 0.2-0.35mm
Infill: 5-10%
Bottom Layer (Optional): 0 

___________________________________________________

Originally designed for the “Original Prusa i3 MK3 ENCLOSURE…", The Lack drawers have found their way on to many desks, workbenches, and other tables as well. Now with the Gen2's rail design you can quickly swap the storage units between work areas.