32-Piece SAE and Metric Socket Organizer Case

I purchased a Harbor Freight tool set with 32 sockets, but didn't like their zip up case.

Everything was printed at 0.3 Layer Height with the latch laying on its side.  The only supports you will need are underneath the Piece that the latch latches on to on the case top and the pegs with flanges.

Pegs were printed at 103% Scale , your mileage may vary.  I would recommend printing the base at 100% scale and then printing a few versions of the pegs to see which ones fit into the case bottom properly.

3x - M3 x 1" bolts with nuts.  (All three are captured)