Unicorn light switch cover

this is a 3D-printed light switch cover that looks like a unicorn. 

print settings/info 

filament: 58 grams when printed with 3 walls and 15% infill 

supports: no 

layer level: .2mm 

brim: no unless you like using them or have really bad bed adhesion 

speed: some sharp corners so be careful if you do not have good adhesion, but use a slow first layer for sure. 

have fun printing!

any feedback would be welcome, also toggle switch coming soon.

feel free to use this for commercial use locally or online with a commission fee of 1$ payable to Venmo- Sutton Ingram @pork929