November 20, 2023
Description
Mechanical replacement buttons for Pebble 2 smartwatch.
Buttons have a slight top ridge to allow for easier fitting to the watch, but that does mean they are a tight initial fit into the plates. If you find the buttons don't push through the holes, scale them down slightly.
Shown printed in PLA on Prusa mk3s FDM printer, using a 0.25mm nozzle.
0.1mm layer height, 20% infill.
Will work using a 0.4mm nozzle, but more likely to require tinkering with the button sizes.
License:
Creative Commons — Attribution — Noncommercial
9
astosia
