May 1, 2021
Description
This mainboard cover is made to update the motherboard fan. You'll be able to mount a 80x80x24 Fan with a buck converter in this cover.
Material required:
1x Buck converter --> https://www.aliexpress.com/item/32912622343.html
1x 80x80 Fan --> Your choice
Assembly instructions.
1) Adjust the voltage of your buck converter to match your Fan.
2) Wired the Fan to the buck converter.
3) Pre-wire you buck converter
4) Clip the buck converter in place
5) Screw the Fan with the supplied screws
6) Be sure your printer is turned OFF and wired the buck converter to mainboard supply.
Print settings
layer height: 0.2
Material: PLA / PETG
I would be very happy about a like or a rating if you like my project!
Feel free to take a look at my other designs!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Lionel_Dagon
