Fosmon WavePoint remote case - TPU

Material: TPU (I used 95A - and the settings below are for this specific material) - For best results, dry your TPU (45°-65° for at least 6 hours). 

Nozzle: 0.4mm

Temp: 223° C

Bed temp: (I used 0, but you can use whatever your printer manufacturer recommends)

Infill density: 10%

Infill pattern: Cross 3D

Walls: 2

Top/bottom layers: 5

Speed: 25mm/s - up to 40mm/s

Retraction: 8mm (at 45mm/s)

Fan: 20%-100%

Build plate adhesion: Skirt (glue stick encouraged)

Support: None

Bridging (Cura): On

Time: 5.5h

Material: ~32g