"DRIP" Enclosure Design/Swag

I really wanted some sort of design to further customize my Printer Enclosure. What I created was multiple “DRIP” patterns that I broke into 5" sections, roughly .125" thick. I made some with a ledge on the top that could be used for support, But I also made some that are just flat models also. The ledges worked better with my set up since I was mounting them on top of a .75" Thick x 20" wide cabinet door frame. 

I experimented with different settings, ultimately I felt like running these with 20% Cubic infill gave me the best results.

Even with the different patterns I would suggest playing around with scaling and pattern combos to make it work for your application.

I plan on adding additional patterns in the future.