Dino Nuggies Piggy Banks (Fuzzy Skin Mode)

Just some dino nuggies I made for the piggy bank contest.

These are made to demonstrate the Time Machine mode that lets your printer emulate a printer from the Mesozoic Era (Fuzzy Skin mode).

But really, the fuzzy skin texture does a decent job of mimicking the texture of chicken nuggets (chicky nuggies). 

Since I noticed people tend to never print my designs with more parts, I kept this to just two parts.

 Print Settings

layer height = .15mm

Fuzzy Skin - Outside Walls

Fuzzy Skin Thickness = .3mm

Fuzzy Skin Point Distance = .5mm

Supports = YES (the pterodactly and stegosarus also need inside supports. Use a screwdriver or long pliers to remove)

Material

I used light brown PETG, but PLA should work well, too.
 

Use some 1.75mm filament for the lid hinge. You can use another piece to “lock” the lid

Adjustments

These are not very big, but if you want me to make it larger, I'd be willing to customize it. I just didn't have enough filament to make a large piggy bank :/

Sincerely,

Laz