Remix of A_R_B's fantastic "Easy Material Settings Calibration Piece" with added 18mm long 0.5mm thick bridging test.
This remix of the original model features:
- print time of 5-10 minutes
- walls are exactly 1.0mm to see over or underflow
- a 45° overhang with a 1.0mm platform that can show warping and if you need to change the filament-fan speed
- Will show any stringing in the tube or between the tube and platform
- a 0.2mm space between the cube and the cylinder which can be checked with a paper if needed
- a 18mm long 0.5mm thick bridging test
King
