December 14, 2023
Description
Qidi nozzles are 3 mm shorter than Volcano ones. So the inductive probe of the X-MAX 3 gets an error when trying to set the Z-Offset.
With this very simple print, the probe is lowered and you can use both Qidi and Volcano nozzles. Simply print and mount it with the two longer screws given together with the spare nozzle or any other m3 screws.
In the pic, the part is the little white brick above the probe.
Remember to re-calibrate the Z-Offset after mounting it!
License:
Creative Commons — Attribution — Noncommercial
7
bla
