Holder for aquarium level controller hose (and narrow clearance between top glass and the sides)

I designed this because on my Dennerle Nano Cube the original hose clip of my Tunze Osmolator nano didn't fit without lifting the lid.
So I made a thing which needs only 5mm clearance between the top and side glass.
Just press fit the hose into the holder and fix it with a cable tie.
if you are frightened of the hose may fall out, you can use a drop of hot glue to keep it there.
Then use the screw to fix the assembly to the aquarium glass (max. 5.5mm)

Use the holder_in for 0.25in hose and the holder_mm for the 6mm

have fun :-)

I designed this as part of my Aquarium mod series:

published project parts so far:

• Fluval Flex Cooling Fan Adapter 40mm
  https://www.thingiverse.com/thing:3640543
• Fluval Flex Cooling Fan Adapter 80mm
  https://www.thingiverse.com/thing:3671625
• Fluval Flex Filter Mod
  https://www.thingiverse.com/thing:3639353
• Suction cup temperature sensor mount for DS18x20
  https://www.thingiverse.com/thing:3640844
• water level controller hose clip for Fluval Flex filter compartment
  https://www.thingiverse.com/thing:3675744

  Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.1 / 0.15

Infill:

Filament:
N/A PETG N/A

Category: Hobby