Nadelspiel-Boxen - Boxes for Double Pointed Needles

I wanted to have some fancy storage boxes for my double pointed needles, so I designed some. Since I always double-check the size I included holes to measure the size before sorting the needles into their slots.

There are two versions, one for a length of 15cm and one for 20cm.

The files are uploaded with a 0.1 tolerance. 

Please use a 0.08mm layer height for the thread-regions in the lower part and the lid.

If you need other texts, sizes or another tolerance, feel free to edit the included Fusion360 files.

If you need another file format for editing which is easily exportable from Fusion360 just let me know.

I printed mine in PLA with mostly 0.2mm layer height (thread with 0.08mm) and put a 8mm brim around the lower part.

Notice: Didn't print the 20cm versions, but I hope I did not make an error while changing the length.