November 25, 2023
Description
Like options? This set of files has a lot of them! The matching looks makes them look great. The ability to pick the exact size for your needs makes them work great!
The sizes 1, 2, 3, 4 relate to number of M-LOK slots that the cover or handbrake will occupy. The short versions can be stacked one next to another. The long versions have slightly extended ends. They are primarily to be used as a single cover. If used with another cover, the hole spacing may not align with slots.
M4x10mm bolts work great for these rails and other slim M-LOK accessories. M4x12mm bolts work for thicker M-LOK accessories. Standard M4 T-Nuts are not quite as wide as the slots in M-LOK rails, but they are wide enough to not spin and they tighten down just fine. You may need to adjust side-to-side a bit to make sure they are straight, but they will work. Most M4 T-Nuts will be shiny nickel plated. If you want them subdued just hit them with flat black spray paint. Alternatively if you want to burn some money, just buy M-LOK hardware.
Print without supports. 0.2 resolution. Infill 80% or better. Filament PLA+ or better. Definitely go with better if you expect to leave your rifle in the sun for any length of time.
License:
Creative Commons — Attribution
11
KN16
