GoPro camera mount on Gridfinity with rotation

About:

• GoPro camera mount on generic gridfinity lid with magnet/screw mount, you can rotate mount vertically
• Holes for 6x2mm magnets.
• Use M5 screw and nut to attach camera (standard)
• (optional) Use M3 screw and nut to tighten rotation in place if you need to be sure it does not rotate more than without it

Please give a like and post makes and provide comments for further improvements.

This is a remix of below models:

• https://www.printables.com/model/507777-raspberry-pi-gopro-camera-mount-compatible-with-rp
• https://www.printables.com/model/275757-gridfinity-base-template-with-improved-holes-and-w
• https://www.printables.com/model/645451-extended-gopro-mount-on-gridfinity (my previous design)

Notes:

• Gcode contains extra moves to trigger button on z-axis to trigger photos for timelapse.
• It is advised to use silicon grease if the rotation is difficult to make.

Print:

• You probably need to set supports for the print on the print bed (because rotating part levitates in mid-air), otherwise the rest should be without supports. Current .3mf file has it only there, so just use in PrusaSlicer ‘For support enforcers only’ and you should be good to go
• Photos from Devil Design PETG Transparent 0.2mm layer with 4 perimeters, 10% infill speed profile on Prusa Mini+.