Rolling Top Storage Box

Remove MINI version until I print it and tune.

------------------------------------------------------------

UPDATE 8/5

Reworked pins for better strength.

Updated files - Pin x3, Drawer (all versions) and Rolling Top.

---------------------------------------------------------------

Assembly is straight forward, easiest to assemble on one of the sides.

No gluing required, even though you may want to glue some parts - up to you.

IMPORTANT - All tolerances are very high to snap fit without glue! Printer must be properly calibrated for parts to fit.

---------------------------------------------------------------------------------------

Optionally you can print the drawer with 2 3 4 or 6 compartments.

For 2 compartments you need to print - ‘Drawer - 2-4c’ + ‘Divider - 2-3c’ + ‘Drawer Front - 2-4c’

For 3 compartments you need to print - ‘Drawer - 3-6c’ + ‘Divider - 2-3c’ x2 + ‘Drawer Front - 3-6c’

For 4 compartments you need to print - ‘Drawer - 2-4c’ + ‘Divider - 4-6cv’ + ‘Divider - 4ch’ ‘Drawer Front - 2-4c’

For 6 compartments you need to print - ‘Drawer - 3-6c’ + ‘Drawer Front - 3-6c’ + ‘Divider - 4-6cv x2’ + ‘Divider - 6cv’

Another option dividing top part to 2 compartments.

For this you need to print alternative Shelf Divided and Top Shelf Divider.

---------------------------------------------------------------------------------------

PLEASE REPORT ANY ISSUE DURING PRINTING OR ASSEMBLY I WILL BE GLAD TO HELP!