May 5, 2021
Description
This is a remix of ‘X-axis cable holder / protection’ model by Boogie with a 45 degree angle for the cable support arm inline with the natural direction of the cable as to not cause excessive strain on the cable as the printer moves throughout its z-axis range.
The cable support slips on over the rear of the motor; use a wire/cable tie to secure the cable to the support arm in the provided groove.
The g-code is set for PETG, 0.15mm layers, quality setting, 25% grid infill, 0.40mm nozzle.
UPDATE: Improved the cable arm a bit.
License:
Creative Commons — Attribution — Noncommercial
7
jimmyD30
