May 5, 2021
Description
Filament: Designed for PLA
Infill: 10%
Layer hight: First layer 0.3mm, Remaining layers 0.2mm
Nozzle: 0.4
Nozzles temp: First layer 215c, Remaining layers 210c
Bed temp: First layer 60c, Remaining layers 60c
Supports: Yes, Rectilinear
Print time: Approximately 44 minutes
Filament required: Approximately 1.47m
Works on 6 inch beds
Works on not heated beds, with the inclusion of a 4mm brim
Make sure to measure the desired finger, and adjust the thimble size accordingly for an accurate fit.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
PealPrint
