Umbrella corporation plaque

I have a thing for the Umbrella logo so I decided to make one for myself.
It's quite chunky so it can stand on its own but you could always trim off a bit in the slicer and just lean it against something to cut down on the print time.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

5

Filament:
 

Prusament/Primavalue PLA 

Black/Red/White 
 

Notes: 

A filament switch is required for the text, I simply paused the print when it reached the first text layer

Post-Printing

I couldn't quite get the logo pieces (umbrella arrow.stl) into the pockets so I took a knife and cut just a tiny bit around the edges of the bottom and then they simply snapped in. Also make sure the corners are sharp.
I ended up not even using glue since I can't get the damn things out.
I suppose if you'd prefer it you could just scale the pieces down maybe 0.5% or so and glue them in