Cheer Bow Earrings / Keychain / Pendant

The cheer bows are placed face down in .3mf file so that the front of the bows pick up the texture of the build plate. I've found that doing this with a textured build plate creates a nice finish on the surface and help hides the lines created when the filament is laid down.

The file is split into objects for each section of the bow, so selecting filament to match your desired colors is super easy.

Print/Filament settings:

0.16mm Layer Height

Arachne Wall Generator

3 wall loops

4 top/bottom layers

10% infill with Cubic pattern (This is only a 12 layer print at 0.16mm height. With 4 top and bottom layers only 4 layers are actually infill.)