SKADIS Tweezers Holder

This is a holder for up to ten tweezers and optionally one additional cross tweezer. I found no holder which is mounted vertically to the wall and was suitable for my set of ten SMD tweezers, which you can find easily in the common online stores. An additional cross tweezer can be placed at the front side as seen on the picture. 

The holder is mounted vertically to the wall via a hook or the T-Nut-system from 6d6178 (M3 screw), so it doesn't need much space on the wall. T-Nuts can be found at the T-Nut-System or you use other T-Nuts like e.g. the ones i designed (T-Nuts).

For the assembly you need one top and one bottom piece. There are 12 files for the top (hook or T-Nut mounting, with or without hook for cross tweezer, space for 6, 8 or 10 tweezers) and 6 files for the bottom (hook or T-Nut, 6, 8 or 10 tweezers). 

Printing

3 perimeters

15% infill

PLA or any other material of your choice

no supports required if used with T-Nut-System

Customizing

The OpenSCAD file is also included where you can customize the 

• wall mount (Hook or T-Nut)
• number of tweezers
• with or without hook for a cross tweezer