• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
| ATLA | Sokka's club 3D Printer File Image 1
| ATLA | Sokka's club 3D Printer File Image 2
| ATLA | Sokka's club 3D Printer File Image 3
| ATLA | Sokka's club 3D Printer File Thumbnail 1
| ATLA | Sokka's club 3D Printer File Thumbnail 2
| ATLA | Sokka's club 3D Printer File Thumbnail 3

| ATLA | Sokka's club

Sedak avatarSedak

January 28, 2024

printables-icon
DescriptionCommentsTags

Description

| BASIC DESCRIPTION |
  • this is the club from Sokka that he uses troughout the series
  • the shape and size of the weapon is changing throughout the series and even in the episode, but this is an approximation
  • Description from Avatar Wiki (https://avatar.fandom.com/wiki/Sokka's_weapons):

“Sokka's club is a blunt force weapon used for striking. Its haft was carved from a polar bear femur and fixed with a heavy, solid sphere at the end, which was painted blue. Just beneath the sphere is a notch for hooking an opponent's weapon, and the handle is wrapped with a leather strap for improved grip.”

  • with this peaces you also need some lether straps for the grip on the handle

 

Sokka holding the weapon:

 

| DESIGN DECISIONS |

  • it had to be designd so that there are no supports needed, also I made it so that all the parts are fitted using connectors - you can use glue if you want to but the connectors are holding the pieses pretty tight
  • you can easily disassemble it later if you have to
  • the parts are made so that they all fit on a standard size beds

 

| PRINT SETTINGS |

  • no supports are needed

 

  • General settings:
    • layer height - depends on your preference
    • 5% Cubic infill is enough
    • no brim
    • all the parts are oriented

 

| OTHER ATLA MODELS |

| ATLA | Avatar Kyoshi's headdress:

https://www.printables.com/model/659114-atla-avatar-kyoshis-headdress

| ATLA | Northern Water Tribe Healing Hut:

https://www.printables.com/model/674280-atla-northern-water-tribe-healing-hut

| ATLA | Earth Rumble Battle Arena Icon:

https://www.printables.com/model/741641-atla-earth-rumble-battle-arena-icon

 

| ASSEMBLY |

  • the connectors are all the same size - you just put one in each hole and connect the parts together. The orb has a special peg on it self that fits into a hole on the club (it is not in the picture because this was version one of the weapon - I added the peg for additional stability of the orb)

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

3D Printing on Fabric - Hexagon / Triangle Pattern Test preview image

3D Printing on Fabric - Hexagon / Triangle Pattern Test

UncleJessy profile image

UncleJessy

3,921

HeadTag – The Crowd-Finding Headband! preview image

HeadTag – The Crowd-Finding Headband!

G3D Printlab profile image

G3D Printlab

570

Skull Jewelry Set preview image

Skull Jewelry Set

DaveMakesStuff profile image

DaveMakesStuff

2,949

Wolverine’s Dog Tags – Marvel Cosplay Print preview image

Wolverine’s Dog Tags – Marvel Cosplay Print

TAH3DGeek profile image

TAH3DGeek

142

Han Solo Gun Belt Parts preview image

Han Solo Gun Belt Parts

seankfields profile image

seankfields

2,508

Sheriff's Badge Blank with Magnetic Backplate preview image

Sheriff's Badge Blank with Magnetic Backplate

Lazzy profile image

Lazzy

36