December 13, 2023
Description
Print using default “.2 mm speed” setting.
Assembly
Insert the 3 feet through the openings in one of the base pieces. pull until they are sitting flush (sits 1mm above lip).
Gently bend the main body at the seams while pushing into base from previous step.
Once the main body, base, and feet are connected, push the second base onto the the top side.
*Use pliers to press bases onto main body. Push on the lip that is being inserted, DO NOT press on the circular patterns, they will break.
*After printing lightly running a knife or razor down the seams helps them bend cleanly.
License:
Creative Commons — Attribution — Noncommercial
KiloxTango
