Bolts, Nuts, Washers. Huge Base

Base

The base includes bolts, nuts and washers of M2 - M48.

Separately models are placed in specific folders.

All data collected in All_in_one.dwg file (autocad).

!Attention!  

Be careful when using for accuracy critical parts (or use Horizontal Expansion/ XY Size Compensation: for nuts practical number is from [-0.2mm] to [-0.4mm]) - it may differ from your expectations. Be attentive with sharp corners and bevel on thread - it may not be corresponded with regulatory standard.

Sizes and tolerance for M8 bolt and nut as example are presented below. 

Bolts

Bolts are separeted by thread size and lenght (from 3 to 300 mm):

• M2 - 3-16 mm
• M3 - 4-30 mm
• M4 - 6-60 mm
• M5 - 6-80 mm
• M6 - 8-90 mm
• M8 - 8-100 mm
• M10 - 10-200 mm
• M12 - 14-260 mm
• M14 - 16-280 mm
• M16 - 20-300 mm
• M18 - 20-300 mm
• M20 - 25-300 mm
• M22 - 30-300 mm
• M24 - 35-300 mm
• M27 - 35-300 mm
• M30 - 40-300 mm
• M36 - 50-300 mm
• M39 - 55-300 mm
• M42 - 55-300 mm
• M45 - 60-300 mm
• M48 - 65-300 mm

Nuts

Nuts presented by standard and low profiles of M2 - M48.

Washers

 Washers presented by standard, narrow and wide profiles of M2 - M48.

Note: Be ready to use Horizontal Expansion / XY Size Compensation (for nuts practical number is from [-0.2mm] to [-0.4mm]) setting for precise docking, especially for Nuts.