Renault Scenic I Replacement Hinge

The design itself represents the same compliant hinge that you will find in original storage box lid and it is integral part of it (see picture below).

It was printed in NYLON (Fiberlogy) which is not easy to print w/o enclosure (in my case), especially if you want to print a small and tall single parts with thin walls but I think that this material is the best choice here and with few tricks it is possible to get nice print. Check my 3mf or gcode file for more details.

Important! Don't use “Detect thin walls” for this print (link) or it will print two separate parts.

FYI: Red marked pillars should be cut out after print (see picture below).

See final result below…

…have fun :)