November 30, 2023
Description
Tried to design my own Printception Vase/Container and here is my Result!
Just print it like shown in the picture. No gluing required!
Currently standing next to my Printer to collect the waste (brims ect..)
Have fun with it!
To get the best results I recommend using the smallest layerhight possible! If you want to go fast just make sure to bump up the resolution on the little tail on the top so your overhangs turn out good!
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
25%
Filament: Polymaker Polyflex PETG Orange
Notes:
Print like shown in the picture. No Supports/gluing/screws needed!
If you like you can move the vase down on the Z axis and clip the bottom roundings to make your print easier.License:
Creative Commons — Attribution — Noncommercial — Share Alike
cimbr / 3BRM
